I currently own a Rikon 10-340 and find it somewhat frustrating in use due to vibration, noise, and constantly having to adjust tracking and or guides every time I tension blade for use. The blade also runs in a recpricating motion, which in turn makes the rear guides hard to set. I have done everything but replace the tires to try and remedy this to no avail. What I am wondering is if this is fairly normal for a bandsaw as this is the first and only bandsaw I have used or owned. I am considering selling it along with some other equipment and buying a laguna 14suv with money. Would this saw perform any better or would it be a downgrade? My rikon has a 3hp baldor and I mainly use it for resawing. Any feedback or input would be greatly appreciated, thanks.