Article on CA glue.....

[Sid Matheny]

Using Keith's link, I do not have permission either.

Sid

[Keith Outten]

I'll ask Aaron to take a look,

[Jim Meyer]

I do not have permission also Jim

[John Schlueter]

Now that we're all excited about reading the article, but can't access it, how will we know when it's posted?

[Steve Schlumpf]

I will post about it and include a link to the article!

[Tom Giacomo]

I don't know I got right on. Maybe I'm the chosen one.

[Keith Outten]

OK, try again.

I'm not familiar with the procedure required to publish articles but I may have it approved this time. Since Aaron is to busy I will have to get some training on how to do this properly.

http://www.sawmillcreek.org/content....in-Woodturning

[Joe Kieve]

Can't explain why but Keith's link opened right up for me. Go figure. Excellent article Wally. Gotta take mine out of the frige and put in the freezer.

[James Combs]

OK, try again.

I'm not familiar with the procedure required to publish articles but I may have it approved this time. Since Aaron is to busy I will have to get some training on how to do this properly.

http://www.sawmillcreek.org/content....in-Woodturning

Hi Keith, does this mean that you will be looking at publishing the other 25+ unpublished submissions in the authors forum, no pressure just curious,.