I am in the process of purchasing a Pro 2000 Oneida cyclone with a 5hp motor. I have built my own pneumatic 6" Clear Vue blast gates that are triggered by the power of each tool.
Ideally I would like to add a remote signal (not a key fob) to each blast gate solenoid box that would send a signal to the dust collector to come on and run for a minimum of two minutes or so. If that is overly complicated I would like to run 24 volts from each blast gate control box to the contactor of the cyclone. I would also like to incorporate a bin sensor into this circuitry as well.
I am familiar and comfortable with wiring high and low voltage but not so good with designing control circuits.
I would be happy to pay someone for their time and expertise. Please send me a PM if interested.
Kind regards, Chuck