Had some time this morning - and in an effort to get more organized - milled up strips to hold router bits in a drawer. Of course, I don't have that 17/32" or 9/16" drill bit suitable for holding the 1/2" shank bits, and a 1/2" bit drills a hole too tight to get the bits in and out easily. By serendipity, discovered that 1/2" copper tubing fits a 5/8" hole perfectly, and type L tubing provides a nice loose fit for 1/2" shank bits. What is an easy way to make the large number of copper tubing cutoffs (50+/-) necessary to hold my bits? I left my tubing cutters someplace "not here" apparently - and I'd be loathe to do that many cuts with a tubing cutter anyway.