Results 1 to 4 of 4

Thread: Having problems with my CAMTECH L5 Laser...URGENT help needed

  1. #1
    Join Date
    Jun 2009
    Location
    Portugal
    Posts
    106

    Having problems with my CAMTECH L5 Laser...URGENT help needed

    Hello to all...

    Im looking for some help since i'm having a problem with my Camtech laser L5.

    In the attached image you will see a small fail in the engraving (a line). When this gap in the engraving happens i hear a small "clack" in X axis but the machines continues to engrave the job, but out of the original start point. (lightly to the right side)

    Strange thing is that this problem does not allways occur every time i engrave. I can do a perfect job, and the next one will have this fail.

    I dont think this is a software error (tpc win), i think its a mechanical problem.

    Could this be caused by some wastage problem on the pinions or racks?

    I dont have any technical support by Camtech since they closed in Canada a few years ago, and i cant find any company or person in Portugal who could help me on this, so any help or suggestion is welcome.

    Thank you all

    Regards from Portugal
    Miguel Pinho



    20141205_162920.jpg
    20141205_164022.jpg
    l5_zoomed-250x250.jpg
    Last edited by Miguel Pinho; 12-05-2014 at 12:54 PM.

  2. #2
    Join Date
    Mar 2014
    Location
    Iowa USA
    Posts
    4,441
    Did you try a Search on here? Found this > http://www.sawmillcreek.org/showthre...ngraving-issue
    Retired Guy- Central Iowa.HVAC/R , Cloudray Galvo Fiber , -Windows 10

  3. #3
    Join Date
    Jun 2009
    Location
    Portugal
    Posts
    106
    Yes, i've had the same problem a year ago.
    I cant find any supplier for the parts here in Portugal, but i found this shop that maybe can supply me with: http://www.cncroutershop.com/ca/cata...sult/?q=chains

    Do you know what consumable parts i may need to replace on the machine to fix this problem?
    This is a 12 year old machine with daily use.

    Thank you
    Last edited by Miguel Pinho; 12-09-2014 at 6:11 AM.
    Corel Draw x3, PS CS3, PhotoGrav 2.1,CamTech L5...

  4. #4
    Join Date
    Jun 2009
    Location
    Portugal
    Posts
    106
    Yes, i've had the same problem a year ago.
    I cant find any supplier for the parts here in Portugal, but i found this shop that maybe can supply me with:http://www.cncroutershop.com/ca/cata...sult/?q=chains

    Do you know what consumable parts i may need to replace on the machine to fix this problem?
    This is a 12 year old machine with daily use.

    Thank you
    Corel Draw x3, PS CS3, PhotoGrav 2.1,CamTech L5...

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •