I hope I've come to the right place for help. I have a Trotec Speedy 300 laser cutter. I've had no problems with using Illustrator files with it. Just recently I sent eight files for envelopes to cut. The envelopes all vary in size and were all set up on the same art board size in Illustrator. They were all created the same way and layers were all separated the same way. Half of the files worked and half didn't. The ones that didn't work are cutting way off and some even have two of the sides of the envelope shrink but the other two sides stay the right size. I have an image of one of the cuts that's way off. I hope someone has experienced this before and can help me. I'm not the one who operates the laser cutter, I just set up the files to send to it. Thanks!
BadCut.jpg