I have a 1970's model Marples 12" turning saw on its way as we speak. I've always lusted after a band saw, but that's not the direction I'm headed. All hand tools for me. I'll spend the difference on some spare blades and lots of lumber!
I have a 1970's model Marples 12" turning saw on its way as we speak. I've always lusted after a band saw, but that's not the direction I'm headed. All hand tools for me. I'll spend the difference on some spare blades and lots of lumber!
Lots of lumber is good !
You have done lots of resawing by hand then? And know what you are getting into ? And like it that way ?
I thought I would as well.
Nah dude, nah.
signed,
electron addict
(I only use a few, when I need them, to get me through the tough patches, weak character I guess) (I can quit any time) ( I'll use them just once more and then never again).
OK I ADMIT IT !
I LIKE USING MY BANDSAW !
(there . . . I said it)
PS: see photos . . . come on . . . you know you want to use electrons too try just a little.
Ha, ha all kidding aside
PPS: see photos . . . I have done this by hand but in all honesty I can not recommend it.
Last edited by Winton Applegate; 12-22-2014 at 12:22 AM.
Sharpening is Facetating.Good enough is good enoughButBetter is Better.
PPPPPS: aaaaaaahh (you could make one).giving me an excuse to hunt for one (a bow saw)
Here is a quick and dirty that I made. Works great. I am sure your's would look better than mine.
I am also including a photo of my resaw frame. See last photo. Works great !
If you have two people.
How patient is your significant other ?
Mine just loves my bandsaw now that I got it.
Ha, ha.
Last edited by Winton Applegate; 12-22-2014 at 12:47 AM.
Sharpening is Facetating.Good enough is good enoughButBetter is Better.
Wow, that's a large saw! I wouldn't use this one for re-sawing, just for larger curves a coping saw is too small to do. Most of what I've built to date has required no re-sawing... I'll cross that bridge when I get there
Actually,the gunsmiths in Williamsburg use hatchets for roughing out gunstocks. It was done that way in the old days. The stock would be profiled with a bow saw,then hatcheted down to where rasps and other tools could be used.
Nice job of resawing,Winton.
Surprised nobody's mentioned a drawknife. They're quite versatile and efficient for stock removal. Harder to sharpen than they are to use.
I wish I could take some credit for it . . .Nice job of resawing,Winton.
in reality the Laguna system : guides, resaw blade and overall robustness of even their inexpensive saw is the hero here.
I just put some tension on the blade, not much actually, and push wood through it.
Sharpening is Facetating.Good enough is good enoughButBetter is Better.
Then you are more than likely paying too much for your wood. Price drops off when you start buying eight quarter planks and the quality (figure and stability) can, I find, be quite a bit better.Most of what I've built to date has required no re-sawing
You're there. I would be so bold as to say that if you are in this forum . . . you're there.I'll cross that bridge when I get there
Sharpening is Facetating.Good enough is good enoughButBetter is Better.