Good day all:
I want to build a T-Track table, and I was all prepared to order the Rockler T-Track top, but they don't offer free shipping to my area, and really I was already stretching the budget with the free shipping.
So- I want to make my own, but Rockler wants $25 for a 48" section. I have found lots of cheaper stuff, but only the kind that takes either the 1/4" bolts, OR the kind that takes T-slots only. I like that Rockler's T-Track takes both kinds of bolts. Do any of you know of any other suppliers that sell the kind of T-Track that accepts both 1/4" hex and T-bolts? I'm looking at the ones Veritas sells, but it is confusing- it looks like the same profile, but it isn't clear if they take 1/4" hex. Am I reading correctly that they do take 1/4" hex IF you use a washer?
One more question: Have any of you mitered T-track instead of buying the ready-made joints? It looks like the ready-made kind have a bit of a rounded edge at the joint. Seems that would make things slide smoothly around the corners. I could round the corners if I mitered them, but then they wouldn't be anodized.
Is anything ever simple? :-)