Recently purchased a trotec speedy 100 and a separate exhaust from Penn State Industries. Does anyone have a copy of wiring schematics for this?
Recently purchased a trotec speedy 100 and a separate exhaust from Penn State Industries. Does anyone have a copy of wiring schematics for this?
I don't have it in front of me, but I know it was posted in an earlier thread. Be aware, you will need to control a relay with the laser, not the exhaust itself. If memory serves, the control signal is 24V and good up to 100mA (or thereabouts).
Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5
I don't recall an actual schematic, per se, but the pinout was provided (text form), which should give you everything you need.
Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5
I am sure Trotec would send you a diagram for the wiring. They have given me almost everything I have asked for. Tech support is great in my opinion.
.
Mark
In the Great Northwest!
Trotec Speedy C25, Newing-Hall 350 (AMC I & HPGL), NH-CG-30 (Carbide Cutter Sharpener)
Sawgrass 400 Gel Ink Printer, CS5, 5/9/x6 CorelDraw
Karen,
For Penn blower all you need is a switch beside the laser and turn it on prior to pressing go on Trotec JC.
My blower is in garage so I don't hear all the noise. I ran 120v wire from switch to outlet where blower is plugged in.
Trotec Speedy 300 - 60w, with Quatro CSA-626 fume extraction
Xenetech 1625 x2,
New Hermes TX pantograph, CG4 cutter grinder
Brady Globalmark2 label printer,
Assortment of custom tooling , shears & punches, heat bender.
Software: Xenetech XOT, Corel X3, Bartender label software
Here is what I use on mine. http://www.pennstateind.com/store/LR2244.html
I have a 3-1/2 HP 240 volt blower that is at the other end of my shop inside a insulated (for noise) closet that is turned on and off by the remote control that is placed on the top of my laser by the control panel. Also available in 120 volt here http://www.pennstateind.com/store/LR110-3.html
I have used this since 2008 with Zero trouble and still have the original battery in the remote control.
Universal Laser ILS 12.150D (48"x24") 135 watts total, with 60 watt and 75 watt laser cartridges. Class 4 Module (pass thru ability). Photograv 3.0, Corel X6, Adobe Design Standard CS4 Suite, Engrave Lab laser Version 8, Melco Single Head Comercial Embroidery Machine, The Magic Touch System with Oki C711WT printer, and Graphtec CE6000-60 plotter.