I have just discovered that there is a Grizzly G0461 12" Sliding Table Saw available here locally. Asking price for it is $1000, which is a darn sight cheaper than the Paolini ($4,500) and Laguna ($3,500). The Paolini is also too large for my space, not to mention weighing in at 790kg. The Laguna is their odd hybrid cabinet/slider, so I'd prefer to pass on it. The saw is apparently no longer available from Grizzly. It's a 3 phase machine, which doesn't present a problem for me.
So, my question is for anybody who has experience with this Grizz, or their other sliding table saws, especially the G0588 and G0591. Good, bad, okay? I realize it's not a Martin or Altendorf, but it's also does not carry a 5 figure price tag. It only has a 59" sliding stroke, good for crosscutting plywood, although it seems odd that they stopped there rather than pushing it to 61" so that Baltic Birch sheets could be handled. In the event I do get it, suggestions on mobilizing it.