Natural edge square bowl?

[Roger Chandler]

I have been asked to do a demo in April for a natural edged square bowl. I have about 3 ideas percolating about a design for the demo, but I thought I would ask the turners here if you have a picture of a

"natural edged square bowl"

that you have done and can you post a pic of it? It is my belief that a couple of the ideas I have might be what you post [or not! ]

I would really appreciate your sharing with me something you have done that you consider a "natural edged square bowl!" Thanks in advance!

[Thom Sturgill]

This is what i would think of. Not the best bowl, but what I have:
RW_Bowl-top.jpgRW_Bowl-side.jpgDSCF1562.jpg

Florida rosewood

[charlie knighton]

Roger, i guess you were not excepting this, but it qualifies

[Roger Chandler]

This is what i would think of. Not the best bowl, but what I have:
RW_Bowl-top.jpgRW_Bowl-side.jpgDSCF1562.jpg

Florida rosewood

Thanks Thom.........that was one of the designs I was thinking about.........appreciate the pics!

[Roger Chandler]

Roger, i guess you were not excepting this, but it qualifies

You are correct, Charlie........I was not expecting this!

[Thomas Heck]

Here is one, I cut the corners or it would have had a little more edge.IMG_0638.JPGIMG_0636.JPG

[Thomas Heck]

This other one is just a rustic looking one. For some reason, I can't get the other pic to upload.

[Roger Chandler]

Here is one, I cut the corners or it would have had a little more edge.IMG_0638.JPGIMG_0636.JPG

Thanks Thomas........I like the bottom of this .......thank for the pics!

[Reed Gray]

Well, I don't have pictures, but I consider a bowl that is turned from a square or rectangular piece of dimensional hard wood to be 'natural' edged. The edge is interrupted, and the original shape is kept. I have done some that were trapezoidal as well.

robo hippy

[Rick Hutcheson]

I have a video of how I do winged bowls. http://www.scrollsaws.com/images/Lat...chWingBowl.wmv