Winton,
I've been known to put a toothed blade into a low angle jack
I've not had the chance yet to try the custom totes on the LV planes, the old one's were very uncomfortable to me, so I gravitated to LN for my modern planes.
Winton,
I've been known to put a toothed blade into a low angle jack
I've not had the chance yet to try the custom totes on the LV planes, the old one's were very uncomfortable to me, so I gravitated to LN for my modern planes.
I take .005"~ cuts no problem, and most of my finish cuts are .003" unless at the last few cuts.
Bumbling forward into the unknown.
Sharpen the blade on the 4 and have at it. It is not rocket science