So this is my first post so hoping I do it right. Basically I have a 100w hurricane laser that blew a laser tube and power supply. since they are out of business I had to find parts myself so I ordered a 100w power supply off of lightobject. after finding that it arcs I have gone thru as much as I can do without help. it appears to me to power supply might be wrong. no stickers on the old one but was able to (once opened up) find a manufactures website and ascertain by dimension size that it appears to be a 60w power supply in a 100w laser that I have now replaced with a 100w power supply. it should be noted that the 110v wall power splits into what appears to be 2 separate power supplys . is It possible that a 100w laser could only need a 60w power supply if it does have a power supply elsewhere? I ran the machine for years without issue (other than the normal alignment type issues). someone please help I am booked for conventions (aka work) in 2 weeks and have been running outta product.... thank you in advance. (ps attached pics to see if it helps)image7.jpgimage6.jpg