Results 1 to 3 of 3

Thread: old iron bandsaw blade tension

  1. 03-27-2015, 8:43 PM #1
    Kevin Jenness
    Kevin Jenness is offline [OP] Contributor
    Join Date
    Mar 2006
    Location
    Vermont
    Posts
    3,647

    old iron bandsaw blade tension

    I am considering getting a carbide blade for my 36" Crescent, but unsure how much force I can generate on it for blade tension. I have run a 1" carbon steel blade on it in the past with decent results. Has anyone with the same or similar saw successfully used a 3/4" or 1" carbide blade for resawing in the 6-10" height range?
    Reply With Quote Reply With Quote
  3. 03-27-2015, 9:36 PM #2
    peter gagliardi
    peter gagliardi is offline Member
    Join Date
    Jan 2013
    Location
    Williamstown,ma
    Posts
    996
    I run a 36" Tanny, and a 30" Yates, and there is no problem tensioning them. That size Crescent should be plenty stout.
    Reply With Quote Reply With Quote
  4. 03-28-2015, 12:03 AM #3
    David Kumm
    David Kumm is offline Contributor
    Join Date
    Feb 2011
    Location
    Central WI
    Posts
    5,666
    If the tension mechanism is intact and spring is good you will tension way past the 25-30,000 psi needed for a Trimaster. My 1936 Oliver 217 can do it easily. DaveDSC04308.jpgDSC04312.jpg
    Last edited by David Kumm; 03-28-2015 at 12:11 AM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules