I am going crazy trying to find 6" hose fittings for my dust collection. All the sites I have checked tend to stop at 4". even those that sell 6" hose! Web searches have not helped.
I'm setting up my new Grizzly G1066Z double drum sander. I expect this to put out a huge amount of dust. It has two 4" hose connectors directly above the drums. I have a 5hp central vac with 6" tubes running to several wall ports. I have connected a 6" to two 4" "Y" using 1' of 4" hose for each port of the sander. Now I need to connect the 6" hose to the 6-4/4 "Y". the 6" hose appears to be the same ID/OD as the "Y". I think a 6" union is what I need, but can't find one.
Any help finding a solution to connecting a 6" hose to the "Y" would be appreciated.