Page 1 of 2 12 LastLast
Results 1 to 15 of 21

Thread: Trailer Tires

  1. #1

    Trailer Tires

    Last year I bought a 5x8' utility trailer to haul my bike to NH in from AZ, Trip out was no problem but I blew two tires on the way home. The trailers rated for 1650lbs so the weight of the bike should not be a problem. But tire size is 12". My question is can I put bigger tires on the trailer. I found some 15" tires with the same lug pattern, I might have to modify the fenders , but I had a couple people tell me I'd burn the axle bearing out if I put the bigger tires on. This really didn't make much sense to me because I'm thinking bigger tires will put less wear on the axle bearing.So what do you guys think?
    Reason I haul the bike instead of ride is I go for a few months and also have pets I take. I've rode cross country many times.
    If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
    Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
    Lasercut 5.3
    CorelDraw X5

    10" Miter Saw with slide
    10" Table Saw
    8" bench mount 5 speed Drill Press
    Dremel, 3x21 Belt Sander


  2. #2
    Join Date
    Jun 2006
    Location
    The Hartland of Michigan
    Posts
    7,628
    I'm with you about bigger tires.
    I have 13" Pinto wheels and tires on mine. The bigger tire will turn slower.
    The tires I have are trailer rated.
    Never, under any circumstances, consume a laxative and sleeping pill, on the same night

  3. #3
    Join Date
    Dec 2009
    Location
    El Dorado Hills, CA
    Posts
    1,311
    I am not an expert on the subject, but I think the problem is the speed rating of the cheap 12" tires. Some specify 45 or 55 MPH maximum. Make sure you get tires that are highway rated.

    I agree that larger tires seems like it should put less stress on the axles since they will be rotating at a lower rate.

    Steve

  4. #4
    Larger tires should lower the revolutions per minute - so I don't see how your axle bearings would be effected

    I would be more concerned about the 'tongue weight'. As a general rule, you want about 10% to 15% of the total trailer weight on the tongue - you may have to get a different hitch, but it is definitely worth checking

  5. #5
    Join Date
    Jan 2009
    Location
    Lexington, TN
    Posts
    461
    Quote Originally Posted by Bert Kemp View Post
    Last year I bought a 5x8' utility trailer to haul my bike to NH in from AZ, Trip out was no problem but I blew two tires on the way home. The trailers rated for 1650lbs so the weight of the bike should not be a problem. But tire size is 12". My question is can I put bigger tires on the trailer. I found some 15" tires with the same lug pattern, I might have to modify the fenders , but I had a couple people tell me I'd burn the axle bearing out if I put the bigger tires on. This really didn't make much sense to me because I'm thinking bigger tires will put less wear on the axle bearing.So what do you guys think?
    Reason I haul the bike instead of ride is I go for a few months and also have pets I take. I've rode cross country many times.
    I agree about larger tires rotating slower. Larger tires normal have higher load ratings than small ones, but I agree with you about changing them. Get something that is a fairly common size tire so if you should ever be in no man's land you will not be stranded because you need a odd small sized tire that isn't available. I was driving on I40 some years ago when suddenly see blue smoke behind a 1 ton truck with a utility bed pulling a small trailer like you are talking about. He was going 65+ mph I'd guess at the time. The wheel locked up, grinding the tire flat (the blue smoke) and ground the rim down to the center between the lips before he could get pulled over to the emergency pull off area. About 5 lanes of traffic getting into the metro Memphis area during morning rush hour traffic. I stopped behind him to see if I could help. We ended up picking the empty trailer up and sticking it into the utility bed somewhat with the lift gate let down to help hold it in the bed so he could continue traveling. The trailer was not going to be pulled anymore even with a new tire and rim until the bearings and possibly the axle itself were replaced.

    I can tell you too - I have saw ALOT of loose wheel bearings over the years on trailers that doesn't help matters any. I wonder if anyone ever looks or checks them. Trailers are something that most use rarely. You use it, you park it, and forget about it until the next time you need it. Tires all aired up? Good to go.... Never even check to see if the lights work when it's hooked up.
    Universal Laser ILS 12.150D (48"x24") 135 watts total, with 60 watt and 75 watt laser cartridges. Class 4 Module (pass thru ability). Photograv 3.0, Corel X6, Adobe Design Standard CS4 Suite, Engrave Lab laser Version 8, Melco Single Head Comercial Embroidery Machine, The Magic Touch System with Oki C711WT printer, and Graphtec CE6000-60 plotter.

  6. #6
    Spare bearings, tools and bearing grease are the best insurance against a burnt out bearing I know of (but I still repack bearings before any long trip).

  7. #7
    thanks for the replies guys I guess Its ok to put bigger tires on then thanks
    If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
    Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
    Lasercut 5.3
    CorelDraw X5

    10" Miter Saw with slide
    10" Table Saw
    8" bench mount 5 speed Drill Press
    Dremel, 3x21 Belt Sander


  8. #8
    Join Date
    Oct 2006
    Location
    Minneapolis, MN
    Posts
    5,456
    The biggest issue you might find with larger tires is that the tires will now hit the fender. You might have to modify or replace the fenders.

  9. #9
    Join Date
    Mar 2003
    Location
    SE PA - Central Bucks County
    Posts
    65,888
    Don't just look at tire size...look at tire quality. There is a great variance between different trailer tires from various manufacturers...some of them resemble bovine excrement in quality; some are really great tires. For knocking around town, it's less of an issue, but highway use gets them heated up and that's when the fun begins.
    --

    The most expensive tool is the one you buy "cheaply" and often...

  10. #10
    Join Date
    Oct 2006
    Location
    Minneapolis, MN
    Posts
    5,456
    I don't know if any trailer tires are still made in the USA. Carlisle might make some in the USA yet. Almost all trailer tires are made in China now, especially the 12" and 13" sizes. Radial trailer tires should last longer than bias ply.

    Maxxis makes a radial trailer tire in Thailand that is well regarded. I have used them on several trailers with no tires issues yet. The smallest tire Maxxis makes is 13".

  11. #11
    Yea I thought of that and if its an issue I'll cut them off, hmm I wonder if there s rules about fenders??
    Quote Originally Posted by Brian Elfert View Post
    The biggest issue you might find with larger tires is that the tires will now hit the fender. You might have to modify or replace the fenders.
    If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
    Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
    Lasercut 5.3
    CorelDraw X5

    10" Miter Saw with slide
    10" Table Saw
    8" bench mount 5 speed Drill Press
    Dremel, 3x21 Belt Sander


  12. #12
    any recommendations

    Quote Originally Posted by Jim Becker View Post
    Don't just look at tire size...look at tire quality. There is a great variance between different trailer tires from various manufacturers...some of them resemble bovine excrement in quality; some are really great tires. For knocking around town, it's less of an issue, but highway use gets them heated up and that's when the fun begins.
    If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
    Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
    Lasercut 5.3
    CorelDraw X5

    10" Miter Saw with slide
    10" Table Saw
    8" bench mount 5 speed Drill Press
    Dremel, 3x21 Belt Sander


  13. #13
    I'll look them up. Thanks.

    Quote Originally Posted by Brian Elfert View Post
    I don't know if any trailer tires are still made in the USA. Carlisle might make some in the USA yet. Almost all trailer tires are made in China now, especially the 12" and 13" sizes. Radial trailer tires should last longer than bias ply.

    Maxxis makes a radial trailer tire in Thailand that is well regarded. I have used them on several trailers with no tires issues yet. The smallest tire Maxxis makes is 13".
    If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
    Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
    Lasercut 5.3
    CorelDraw X5

    10" Miter Saw with slide
    10" Table Saw
    8" bench mount 5 speed Drill Press
    Dremel, 3x21 Belt Sander


  14. #14
    Join Date
    Jan 2008
    Location
    Western Nebraska
    Posts
    4,680
    Late to the thread, but I'll add one more thing, you don't have to use trailer only tires on a trailer. Use a good quality car tire if it's available. I use good takeoffs for trailers often. Personally I HATE those stupid tiny wheels on trailers. They do nothing well. If possible, mount as big as you can get. I don't use smaller than 15" because they hold up so much better, and wear and tear on the trailer is MUCH better. Wheel bearings should last a long time to BTW, like life of the trailer. If they aren't something is wrong.

  15. #15
    Join Date
    Feb 2003
    Location
    McKean, PA
    Posts
    15,649
    Blog Entries
    1
    Quote Originally Posted by Bert Kemp View Post
    Yea I thought of that and if its an issue I'll cut them off, hmm I wonder if there s rules about fenders??
    Most states have laws requiring fenders on trailers to prevent water spray and rock throwing.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •