These are the latest cribbage boards that I made.
The lighter one is spalted hackberry and the other 1/4 sawn sycamore. I used General finish. They sold pretty quick.
Quinn
[OP]
In Memoriam
These are the latest cribbage boards that I made.
The lighter one is spalted hackberry and the other 1/4 sawn sycamore. I used General finish. They sold pretty quick.
Quinn
Contributor
Very nice, Quinn. They look perfectly executed. Do you drill with a very fast drill ?
[OP]
In Memoriam
Thanks Yonak,
I bought a template off of ebay. The first one I did I clamped the template on and even got cleaner hole. I was always moving clamps to do a new area. One time it moved a bit and ruined the board. Now I use double face tape so there is a little gap and the holes aren't as clean. I clean the face up with a belt sander. I have never had any template movement withe DS tape.
Quinn
Contributor
I've never seen templates. Does it not have edge guides ?
[OP]
In Memoriam
yonak,
This is similar to the template I have. http://www.chefwarekits.com/cribbage...odworking.html
I keep the template 1/2" in from the edge so I have room to route.
Hope that help.
Quinn
Posting Permissions
Reply With Quote