I have a Millers Falls 1413 back saw that I purchased new for shop use in the 1970s. It has been used for anything and everything, wood wise that is. It has been touch up sharpened by myself and others over the years but the tooth line remains straight and not bad. It is about rip filed at this point. I want to try a hybrid file on it. Although I have only done light touch up filing I am confident that I can file the saw to any profile. What I need is an idea of rake and fleam for a hybrid filing for a general use saw. I have good carcass and dove tail saws so this saw would be my grab and go saw for the bench. Thanks in advance.
Jim