Originally Posted by
Ken Garlock
The difference is that they recommend putting split rubber tubing around the edge of the large end and push it right up to the bottom of the saw, or at least as far as you can without interfering with the saw miter table movement. They also said to ignore the 1" outlet by leaving the bag in place
.
"Split rubber tubing"???? What is that? Are you saying that there needs to be some kind of an enclosure that sort of seals around the bottom of the saw? Maybe kinda like weather striping only thicker?
Edit: Maybe if I had a piece of sheet metal and took a garden hose and split it and put that on one edge of the sheet metal and then placed that around the hole I cut in the table extending it above the table to where it just touches the bottom of the saw.
Last edited by Larry Browning; 08-10-2005 at 7:38 PM.
Larry J Browning
There are 10 kinds of people in this world; Those who understand binary and those who don't.