Here's a quick dial indicator attachment I created and laser cut for my 3D printer (Cubex). Super basic but gets the job done. All the pieces were cut from .118 and then bonded together. Made on a laser so I thought I'd share.
[OP]
Member
Here's a quick dial indicator attachment I created and laser cut for my 3D printer (Cubex). Super basic but gets the job done. All the pieces were cut from .118 and then bonded together. Made on a laser so I thought I'd share.
I design, engineer and program all sorts of things.
Oh, and I use Adobe Illustrator with an Epilog Mini.
Posting Permissions
Reply With Quote