Is there a way to have a single vector do 2 passes automatically?
I know I could duplicate the vector in another color and do it that way but to me that clutters the job.
I'd like to do 2 passes with just 1 vector.
Thanks
Is there a way to have a single vector do 2 passes automatically?
I know I could duplicate the vector in another color and do it that way but to me that clutters the job.
I'd like to do 2 passes with just 1 vector.
Thanks
Jeff Body
Go-C Graphics
China 50W Laser
Model # SH-350
Controller RDC6442
Vinyl Plotter Graphtec CE600-60
Software used
Inkscape, FlexiStarter, VinylMaster 4, RDWorksV8
You can copy and paste it right over the top of the first one. It does not need to be a different color. It won't clutter the job at all.
Shenhui 1440x850, 130 Watt Reci Z6
Gerber Sabre 408
I didn't even thing of that.
2 objects the same color will cut 2 times.
You're a Genius.
Jeff Body
Go-C Graphics
China 50W Laser
Model # SH-350
Controller RDC6442
Vinyl Plotter Graphtec CE600-60
Software used
Inkscape, FlexiStarter, VinylMaster 4, RDWorksV8
I cut 2 passes by copy and paste on top of one another. Some times I will use different colors to change speed and power like when I am using a masking material on acrylic.
Or...you could just simply press start again on the laser I do that all the time. I set the power/speed to default (local panel). Adjust locally and run it twice if I wish.
I frequently send two jobs. One for the scans/dots, etc. And the final one does the cutting. Handy way to do things in case your power wasn't quite enough to cut. You simply run the cut job a second time since it won't include any scan/dot objects.
[SIZE=1]Generic Chinese 50w 300x500
Lulzbot TAZ 5 3D Printer
Corel X7, Photoshop CS6, Lightroom 4
Modo, Bryce, Poser
If You Can Read, Thank A Teacher. If You Can Read It In English, Thank A Veteran
That's what you do in a herd: you look out for each other. - Manny from Ice Age