need murphy bed hardware

[Steve Wolfe]

Hey Guys I am contemplating a Murphy bed project and was wondering if anyone out there has been through the process. I need to know where to find the hardware and perhaps gain some insight on procedures/potential pitfalls. Thanks
Steve Wolfe

[Jamie Buxton]

Welcome to the Creek!
The hardware that gets used most often is the Create-A-Bed kit. You can buy it from them or from online retailers like Lee Valley.
There are many threads in the Creek archives about this topic. You'll find lots of opinions and experience. Use SMC's Search function to find them.

[Steve Wolfe]

Thank you. I did try searching but didn't come up with much. Admittedly I don't know my way around the site yet.

[Jamie Buxton]

Thank you. I did try searching but didn't come up with much. Admittedly I don't know my way around the site yet.

Go up to the right corner where there's a type-in box. Enter a search term like "murphy", and click on the magnifying glass icon. You should get whole bunch of threads.

[Keith Outten]

Use the Advanced Search, its powered by Google.
.

[Chuck Hart]

Rockler carries Murphy bed parts

[Don Jarvie]

Lee valley has it

[Steve Wolfe]

thanks everyone

[Roy Harding]

I've been thinking about making a Murphy bed for some time, and have done some online searching for hardware. Although I haven't made a decision, these links may be a usefule resource to you, in addition to the suggestions others have made:

http://www.murphywallbedsystems.com/...115583_660.htm
https://www.murphybedsdirect.com/library-beds.html