Hi, this is my first project posting here. I started out wanting to build a reproduction of a shaker table that I saw in a book, but ended up making a few changes. For instance, I put a taper on the underside of the top all around the edge because I liked how it looked, and used violin tuning pegs for drawer pulls.
The book I used had measurements of overall dimensions and a photo, but didn't have much in the way of a building plan to help someone understand the underlying construction. I built this primarily out of the finest Home Depot pine (the type my brother makes bird houses from) figuring that I would learn a lot on this first one, and then build a pair of "real" ones out of cherry. I think the cherry ones will go a lot quicker and come out nicer after building this one.
IMG_0783.JPGIMG_0784.JPGIMG_0785.JPGIMG_0778.JPGIMG_0787.JPG