flute master

[jeff oldham]

Does anyone know where i can purchase a flute master for putting flute on turnings,,,Or anything simular,,,Or anyones experiences on doing this,,thank you

[Shawn Pachlhofer]

here's one: http://www.flutemasters.com/

Penn State also sold a fluting jig at one time, but I don't see it on their website.

[Dwight Rutherford]

It is pretty easy to make a sled to hold a die grinder, Dremel or trim router for fluting. Inexpensive also.

[Tony Rozendaal]

here's one: http://www.flutemasters.com/

Penn State also sold a fluting jig at one time, but I don't see it on their website.

Here it is...

http://www.pennstateind.com/store/LIXGA2.html

I thought I had seen it recently. Sometimes PSI's website can be difficult to navigate.

[Marvin Hasenak]

After having used the Flutemaster, the PSI version and some homemade versions including my own, I bought the Flutemaster. For my uses it was the best design, easiest to use and the price was right.