Page 1 of 4 1234 LastLast
Results 1 to 15 of 46

Thread: Laser Dark FreeStuff Winner

  1. #1
    Join Date
    Feb 2003
    Location
    Hayes, Virginia
    Posts
    14,760

    Laser Dark FreeStuff Winner

    The Winner is John W Richards

    John, contact Lee Biddle to arrange for shipping of your prize.

    Lee Biddle has donated the following for a FreeStuff Drawing.
    The winners name will be drawn on July 8th, 2105 at noon.
    You must be a Contributor and post in this thread if you would like your name to be included in this drawing.


    Laser Dark LLC.


    Laser Dark set which includes:
    1 Laser Dark - Dark Brown
    1 Laser Dark - Black
    1 Laser Dark - Finish Coat
    1 12" roll of R-Conform 4075RLA Masking Tape
    A value of $79.95.


    Brief Description of the product:

    Laser Dark is an easy-to-use, semi-transparent coloring spray for enhancing
    the laser-engraved area on most types of wood. The simple two-step process
    enables users to take what would normally be an illegible laser-engraved
    plaque and make it into an easily-readable presentation piece. Simply follow
    the steps in the video or read our How To Use page, and you can learn how to
    save your company money without remaking plaques and wasting valuable time.
    Customers will notice the quality difference in plaques that do not have
    Laser Dark applied as compared to others with it.

    Also included is the best masking tape we could find. It tears and cuts
    easily and has the perfect amount of adhesive. Enough to protect the plaque
    from bleeding between the tape and the plaque and not so much that it's hard
    to remove.

    Contact info:

    www.laserdark.com
    Laser Dark LLC
    2425 Seymour Rd, Eau Claire, WI, 54703
    715-839-8666

    Due to federal shipping regulations, only shipping addresses the in 48
    continental united states are eligible.
    .
    Last edited by Keith Outten; 07-08-2015 at 7:05 PM.

  2. #2
    Always wanted to try out the Laser Dark product.. sign me up!
    Bruce Clumpner
    Brandon Services Laser Engraving
    Academy Commemoratives - Personalized Memorabilia for the U.S. Service Academies
    Irvine, CA
    -
    Epilog 75-watt Helix, 40-watt 18-Mini
    Started with Corel Draw V1 now feeling the pain of CorelDraw x7
    CS4 photoshop
    CS4 illustrator
    PhotoGrav

  3. #3
    Count me in...

  4. #4
    Join Date
    Mar 2011
    Location
    Florida's Space Coast
    Posts
    389
    Count me in
    Thanks!!
    Steve Kinnaird
    Florida's Space Coast
    Have built things from wood for years, will finally have a shop setup by Sept. 2015 !! OK, maybe by February LOL ……

  5. #5
    Join Date
    Oct 2007
    Location
    Cincinnati, Ohio
    Posts
    1,843
    It's a great product, comes in handy when the desired burn just doesn't happen. I'm in.
    Tim
    There are Big Brain people & Small Brain people. I'm one of the Big Brains - with a lot of empty space.- me
    50W Fiber - Raycus/MaxPhotonics - It's a metal eating beast!
    Epilog Fusion M2 50/30 Co2/Fiber - 2015
    Epilog Mini 24 – 35watt - 2006 (Original Tube)
    Ricoh SG3110DN
    - Liberty Laser LLC

  6. #6
    Join Date
    Aug 2006
    Location
    Central MN
    Posts
    194
    Count me in.
    Epilog Legend EX24, Corel X3

  7. #7
    Lee

    Thanks for the donation.
    Mike Null

    St. Louis Laser, Inc.

    Trotec Speedy 300, 80 watt
    Gravograph IS400
    Woodworking shop CLTT and Laser Sublimation
    Dye Sublimation
    CorelDraw X5, X7

  8. #8
    Join Date
    Nov 2006
    Location
    Maple, Ontario, Canada
    Posts
    1,010
    Count me in.
    Trotec Speedy 300 - 60w, with Quatro CSA-626 fume extraction
    Xenetech 1625 x2,
    New Hermes TX pantograph, CG4 cutter grinder
    Brady Globalmark2 label printer,
    Assortment of custom tooling , shears & punches, heat bender.
    Software: Xenetech XOT, Corel X3, Bartender label software

  9. #9
    Yes count me in to always wanted to try it.
    If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
    Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
    Lasercut 5.3
    CorelDraw X5

    10" Miter Saw with slide
    10" Table Saw
    8" bench mount 5 speed Drill Press
    Dremel, 3x21 Belt Sander


  10. #10
    count me in please
    Trotec Speedy 360 80 watt laser
    Custom CNC router 4' x 5'
    GrapthTec FC7000-75 vinyl cutter
    Keiling KL6090S CNC router
    Ricoh SG3100DN sublimation printer

  11. #11
    Join Date
    May 2011
    Location
    Rarotonga, Cook Islands
    Posts
    88
    I'd like to give it a try.
    Bill Carruthers, Rarotonga, Cook Islands
    Shenhui G350- 60W; + Hengchunyuan 1300x900 100W EFR , CNC router 40x60, Lightburn fan, RDCam , Coreldraw 12, Photograv 3, Scroll saw, and not enough time to play with all of them!

  12. #12
    Join Date
    Jan 2014
    Location
    Boone, NC
    Posts
    41
    If this is like the old political adage of "vote early, vote often", count me in multiple times. ;-) Aside from the jest, thanks Lee. I have also wanted to give it a try.
    VLS4.60 30W

  13. #13
    add me to the list too please
    Universal v-460 50 watt with rotary
    CorelDraw x6, Photograv 3
    Garage full of wood working tools

  14. #14
    Count me in.
    joe

  15. #15
    Count me in. Thank you.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •