I recently completed a simple shaker-style side table to replace the cheap termite-barf version SWMBO picked up from a big box. I started with a single 6/4 cherry board which allowed me to get rift-sawn legs and match color consistently.1. Board.jpg
I don't have a bandsaw with sufficient resaw capacity for the top, so had to do it the hard way. 2. Top Resaw.jpg3. Top Resawn.jpg
After gluing the top, I crosscut, marked the other end, cut and shot the far end to get a square. 4. Marking Top.jpg
Scraped a bead in the rails. 4.1. Beading.jpg
And began glue-up. I'm pleased with the grain in all 4 edges of all 4 legs. 5. First Assembly.jpg5.1.Rift Sawn.jpg
This was a quick project...I like to insert these into my build plans. Some of my other pieces can take....a while....to complete (*cough* years *cough*). 6. Completed.jpg