This is carved from 1/2 inch PVC lumber I got from Home Depot. I intend to mount this outside. I used acrylic paint per instructions on the board label. Does anyone one know if it's necessary to apply an additional sealer?image.jpg
[OP]
Member
This is carved from 1/2 inch PVC lumber I got from Home Depot. I intend to mount this outside. I used acrylic paint per instructions on the board label. Does anyone one know if it's necessary to apply an additional sealer?image.jpg
Member
Nope, you're good to go as is.
Equipment: IS400, IS6000, VLS 6.60, LS100, HP4550, Ricoh GX e3300n, Hotronix STX20
Software: Adobe Suite & Gravostyle 5
Business: Trophy, Awards and Engraving
Posting Permissions
Reply With Quote