I have a small aluminum sailboat. It leaks; about a cup a minute. Every 10 minutes or so I have to bail and it is a nuisance.
I calked where I could, but it didn't help. I think the seam between the two halves is leaking. The most obvious fix would be to put tape over it, but what tape. It would have to be waterproof and very sticky. It would probably not come into contact with anything, so durability (other than sticking on) would be secondary.
Any suggestions?
I have a can of the spray that they advertise making a screen door waterproof, but I don't have a lot of confidence in it. Got when Lowes closed it out really cheap; not sure it a great bargain even then, but I have it.
I have seen an epoxy made for the purpose; very thin and it is supposed to flow in and seal any gaps, but it is very expensive.