Lasers : Trotec Speedy 300 75W, Trotec Speedy 300 80W, Galvo Fiber Laser 20W
Printers : Mimaki UJF-6042 UV Flatbed Printer , HP Designjet L26500 61" Wide Format Latex Printer, Summa S140-T 48" Vinyl Plotter
Router : ShopBot 48" x 96" CNC Router Rotary Engravers : (2) Xenetech XOT 16 x 25 Rotary Engravers
Real name Steve but that name was taken on the forum. Used Middle name. Call me Steve or Scott, doesn't matter.
Try using the trim tool:
Sorry you will need to shrink the page to see all of it..
Last edited by James Rambo; 08-28-2015 at 6:40 PM.
EPILOG LEGEND 32 60 WATT, CORELDRAWX5, PhotoGraV2.11, strip heater, PUNTA GORDA, FLORIDA
Quick note Bert, Radius and Chamfer are different in pretty much all CAD programs (just as a note, in case you ever need to use keyboard commands)
You did what !
Thanks Dave, James were is the trim tool?
If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
Lasercut 5.3
CorelDraw X5
10" Miter Saw with slide
10" Table Saw
8" bench mount 5 speed Drill Press
Dremel, 3x21 Belt Sander
Sorry Bert I am not at home. Just cheating at work and looking at the internet. I have a tool bar open at the top of my Corel Draw page that has the 'weld' 'trim' 'simplify' and as couple other tools on it.
EPILOG LEGEND 32 60 WATT, CORELDRAWX5, PhotoGraV2.11, strip heater, PUNTA GORDA, FLORIDA
If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
Lasercut 5.3
CorelDraw X5
10" Miter Saw with slide
10" Table Saw
8" bench mount 5 speed Drill Press
Dremel, 3x21 Belt Sander
The way to find the corners of this square is to select the square. Then select 'arrange' and 'transformation'. In the transformation flyout unclick 'relative position' and click the corner that you want to find coordinates of. Select the small square and locate it on center at the coordinates of the corner. Click 'arrange' 'shaping' 'trim'. And delete the small square. Do the same with the other corner.
EPILOG LEGEND 32 60 WATT, CORELDRAWX5, PhotoGraV2.11, strip heater, PUNTA GORDA, FLORIDA