[OP]
Friend of the Creek
Hi Gang;
See pic below. This is the type of connector used on the RDLC320 mainboard- a very common operating system board used on many Chinese lasers. The connector is about 1 inch wide and 5/16 high.
Does anyone know what type/name/model connector this is and/or where I can find a mating male connector?
Thanks for any help.
Best Regards,
George
LaserartsConn1.jpg
*twin 80 watt Shenhui 1280
*60 watt Laserpro Mercury -42ips
*(2) 30 watt Laserpro Venus-42 ips
*whole bunch of woodworking/metalworking machines
*128 screwdrivers (all needed)
*wonderful wife (1st) of 53 years who allows me to collect screwdrivers
Member
I believe they are called Phoenix connectors.
I couldn't remember that name so I had to google "green electronic connector" to find the answer.
Last edited by Rich Harman; 08-22-2015 at 5:09 PM.
Shenhui 1440x850, 130 Watt Reci Z6
Gerber Sabre 408
Member
George,
Check with DigiKey electronics components.
Trotec Speedy 300 - 60w, with Quatro CSA-626 fume extraction
Xenetech 1625 x2,
New Hermes TX pantograph, CG4 cutter grinder
Brady Globalmark2 label printer,
Assortment of custom tooling , shears & punches, heat bender.
Software: Xenetech XOT, Corel X3, Bartender label software
Member
You've got to love Digikey (and Google):
http://www.digikey.com/product-detai...2414-ND/349181
I design, engineer and program all sorts of things.
Oh, and I use Adobe Illustrator with an Epilog Mini.
Member
DigiKey is fine but I prefer Mouser
http://www.mouser.com/ProductDetail/Phoenix-Contact/1840405/
Shenhui 1440x850, 130 Watt Reci Z6
Gerber Sabre 408
[OP]
Friend of the Creek
Hi Guys;
Many thanks to all-that's the one
Best Regards,
George
Laserarts
*twin 80 watt Shenhui 1280
*60 watt Laserpro Mercury -42ips
*(2) 30 watt Laserpro Venus-42 ips
*whole bunch of woodworking/metalworking machines
*128 screwdrivers (all needed)
*wonderful wife (1st) of 53 years who allows me to collect screwdrivers
Posting Permissions
Reply With Quote