I want to stabilize small area of punky wood (2x12 mm) w CA glue, let cure, then coat w poly-will this be a good idea?
I want to stabilize small area of punky wood (2x12 mm) w CA glue, let cure, then coat w poly-will this be a good idea?
David
Confidence: That feeling you get before fully understanding a situation (Anonymous)
I have done this successfully and had the CA glue be indistinguishable under the varnish (it wasn't poly but another varnish). When I was trying to decide about it, I'd seen some older posts on the same point. In case it is helpful:
http://www.sawmillcreek.org/showthre...Small-Fissures
http://www.sawmillcreek.org/showthre...Maple-Question