I figured I'd just start a new thread on this ...
The following comment was made by Tim Sproul in another thread:
Offline Tim sent me this comment.Originally Posted by Tim Sproul
What if I just screw the runners to the aprons with no glue? That would make it a simple task to replace the runners and much easier than building new drawers. Just flip the table upside down, unscrew the old runners and screw on new ones. I could use maple for both the drawer sides and runners and the only time you'd see the runners is when the drawer was pulled out.Originally Posted by Tim Sproul
I agree that wax is an important part of extending the drawer side bottom/runner life as well as making for a smoother drawer action.
Comments anyone?
Rob