Picked up an old starrett combination square it's a 12 inch for $3.00. What do you guys think?
Picked up an old starrett combination square it's a 12 inch for $3.00. What do you guys think?
If it hasn't been damaged or run over by a truck, probably.
Any chance for a picture?
jtk
"A pessimist sees the difficulty in every opportunity; an optimist sees the opportunity in every difficulty."
- Sir Winston Churchill (1874-1965)
no bends slides smoothly and holds position no wobble
Vinnie,
I'll give you $5----but you pay the shipping!
Bruce
Epilog TT 35W, 2 LMI SE225CV's
CorelDraw 4 through 11
CarveWright
paper and pencils
Looks good, have you checked it for square?
Is there a hole under the level to hold a scribe?
I am not much of a combo square user. Fixed squares tend to be my go to users.
jtk
"A pessimist sees the difficulty in every opportunity; an optimist sees the opportunity in every difficulty."
- Sir Winston Churchill (1874-1965)
I checked it with a machinist square and it is square I'm about to start drawing lines from opposite sides to further check the accuracy. It would have been great if it was a 6 inch but my eyes lit up at the flea market when I read the brand.
Yes the scribe is missing sadly
Are you sure the square head is starrett?
Looks like a Starrett to me. There are at least a couple of different types of heads. I may be one of the few that got any that were cheaper. I was given a half dozen different sizes, and a bunch of other machinist measuring and drawing tools as a gift from a dear old Friend who could no longer work.
I'm very happy I spotted this. Now if I can find a 6 inch cheap I will be thrilled. But I'm not that lucky
Looks like you scored a great deal, congrats!
Thanks I also got a Stanley no3 for $10.00