Page 82 of 82 FirstFirst ... 32727879808182
Results 1,216 to 1,225 of 1225

Thread: Glowforge release

  1. #1216
    Join Date
    Dec 2012
    Location
    Arizona
    Posts
    3,562
    I must mention that the rights to use the design were granted by the designer

    Quote Originally Posted by Lee DeRaud View Post
    OMG, you spent $5 in material and $120 in machine time to make something you could have bought at Hobby Lobby for $10?!? Not to mention infringing the priceless IP rights of whoever posted the design online...

    (Just busting your chops, trying to get myself aligned with the prevailing sentiments here.)
    If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
    Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine
    Lasercut 5.3
    CorelDraw X5

    10" Miter Saw with slide
    10" Table Saw
    8" bench mount 5 speed Drill Press
    Dremel, 3x21 Belt Sander


  2. #1217
    Join Date
    Dec 2010
    Location
    NW Arkansas
    Posts
    1,029
    Quote Originally Posted by Michael Henriksen View Post
    $120 for an hour laser time. You guys live in a different world than I do.
    I do my best to get at least $100 for the CO2 laser if I'm cutting. I only got $75 the other day cutting a couple of sheets out that took about 50 minutes. Design furnished and material. Others get a LOT more.......
    Woodworking, Old Tools and Shooting
    Ray Fine RF-1390 Laser
    Ray Fine 20watt Fiber Laser
    PM2000, Delta BS, Delta sander, Powermatic 50 jointer,
    Powermatic100-12 planer, Rockwell 15-126 radial drill press
    Rockwell 46-450 lathe, and 2 Walker Turner RA1100 radial saws

    RIA 22TCM 1911s

  3. #1218
    Join Date
    Aug 2006
    Location
    Suwanee, GA
    Posts
    3,169
    Quote Originally Posted by Michael Henriksen View Post
    $120 for an hour laser time. You guys live in a different world than I do.
    It's hard to believe anyone could actually make a living at $120/hour... That's my starting point and it usually gets up to two or three times that much on most large volume jobs.
    I have done so much with so little for so long, that I can do almost anything with practically nothing...

    Trotec Speedy 400 80 watt 8/2015
    G. Weike LF-30, 30 watt galvo fiber - 1/2016
    G. Weike LF-30, 30 watt galvo fiber - 3/2015
    DCS-1024DD - 10" x 24" UV Printer
    Fargo HDP5000 Card printer
    40HP Diesel, Rotary screw compressor - "The Beast"
    24" x 40" sandblasting cabinet
    FFL-01


  4. #1219
    I shoot for $60 minimum, almost always ends up being more by default. Little old ladies and their grandkid's trophy plates, I'm lucky to get $15 an hour But those rare but occasional 400-600 per hour jobs even things out. (and because that may seem greedy, those kinds of rates are ALWAYS offered to me, I've never purposely calculated above $120...)
    TEN CNC rotary tool engravers, 3- V3400's, 2- V5000XT's, 1- V5000, 1- V3200, 1- IS400, 1- IS7000, 1- C2000, all New Hermes
    TWO C02 metal lasers, 1- NH LS900 40w, 1- GCC Explorer 35w
    ONE C02 glass laser, Triumph 80w
    ONE Galvo fiber laser, Triumph 30w
    ONE vinyl cutter, New Hermes
    ONE large electric bill. Rocky Mountain Power
    Shears x3, Saws x4, Compressors x4
    Blowers x3, Grinders x3, Drill Presses x2
    Mini lathe,Belt sander
    All at home...





  5. #1220
    Join Date
    Sep 2009
    Location
    Medina Ohio
    Posts
    3,016
    I see they are really going at it on their forum about not shipping the filters with the lasers. some are complaining that they bought into the idea of a unit and filter so they can cut inside their homes or office and not having to vent outside or they can not vent outside. Glowforge offered a 10% discount till 2018 but these people are saying that by the time they get everything the discount will be gone or only for a short period but the units that are able to cut get over a year of discounts. the Beta testers are all over saying that is to bad for you.

  6. #1221
    Join Date
    Apr 2017
    Location
    Sandoy, Faroe Islands
    Posts
    133
    Would any of you vent indoors if your laser had a filter? I certainly wouldn't. I can't imagine it removing all smell or all potentially harmful gasses.
    G. Weike LG900N 110W RECI RDWorks V8
    G. Weike LG6040N 80W RECI Lasercut 5.3

    Stuck on a small rock in the North Atlantic.

  7. #1222
    Join Date
    Aug 2006
    Location
    Suwanee, GA
    Posts
    3,169
    Quote Originally Posted by Michael Henriksen View Post
    Would any of you vent indoors if your laser had a filter? I certainly wouldn't. I can't imagine it removing all smell or all potentially harmful gasses.

    That depends on what you are lasering and what type of filter you have. I just bought a Fumex filter to run my anodized aluminum parts without any smell. It has a pre-filter, a charcoal filter and finally, a hepa filter. The three layers catch the big stuff (pre-filter), the smelly stuff (charcoal) and then the really fine stuff (hepa). I havenít tried anything else with it but it should get virtually 100% of the smell or bad stuff.
    I have done so much with so little for so long, that I can do almost anything with practically nothing...

    Trotec Speedy 400 80 watt 8/2015
    G. Weike LF-30, 30 watt galvo fiber - 1/2016
    G. Weike LF-30, 30 watt galvo fiber - 3/2015
    DCS-1024DD - 10" x 24" UV Printer
    Fargo HDP5000 Card printer
    40HP Diesel, Rotary screw compressor - "The Beast"
    24" x 40" sandblasting cabinet
    FFL-01


  8. #1223
    Join Date
    Mar 2005
    Location
    Anaheim, California
    Posts
    5,498
    Quote Originally Posted by Michael Henriksen View Post
    Would any of you vent indoors if your laser had a filter? I certainly wouldn't. I can't imagine it removing all smell or all potentially harmful gasses.
    Nope. But 99% of what I do is cut wood, MDF, and acrylic: no way a filter handles that without cleaning/replacement almost continuously.
    Yoga class makes me feel like a total stud, mostly because I'm about as flexible as a 2x4.
    "Design"? Possibly. "Intelligent"? Sure doesn't look like it from this angle.
    We used to be hunter gatherers. Now we're shopper borrowers.
    The three most important words in the English language: "Front Towards Enemy".
    The world makes a lot more sense when you remember that Butthead was the smart one.
    You can never be too rich, too thin, or have too much ammo.

  9. #1224
    Join Date
    Apr 2017
    Location
    Sandoy, Faroe Islands
    Posts
    133
    I too cut plywood, MDF and acrylic all the time. I doubt anything will fully remove the smell of acrylic.
    G. Weike LG900N 110W RECI RDWorks V8
    G. Weike LG6040N 80W RECI Lasercut 5.3

    Stuck on a small rock in the North Atlantic.

  10. #1225
    Quote Originally Posted by Michael Henriksen View Post
    I doubt anything will fully remove the smell of acrylic.
    Not to derail this marvelous thread, but my home made filter system scrubs acrylic very very well. You need coconut charcoal as the filter media. We cut a lot of acrylic and when you walk in the door, you can't smell any acrylic. When the charcoal starts getting loaded, you can smell it.
    Lasers : Trotec Speedy 300 75W, Universal PLS4.60 with Rotary Attachment
    Printers : Mimaki UJF-6042 UV Flatbed Printer , HP Designjet L26500 61" Wide Format Latex Printer,
    Ricoh Dye Sublimation Printer, Summa S140-T 48" Vinyl Plotter
    Router : ShopBot 48" x 96" CNC Router Rotary Engravers : (2) Xenetech XOT 16 x 25 Rotary Engravers

    Real name Steve but that name was taken on the forum. Used Middle name. Call me Steve or Scott, doesn't matter.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •