-
Marty,
That's the one. Thanks!!!
Cary
-
Another happy owner, although my only comparison was a Dewalt lunchbox style. Great performance essentially right out of the box (I think I fiddled around a bit with the rollers as per some threads here). I'd buy again in a heartbeat.
Ken
-
well i think if i went to the trouble of removing the roller,i would just go ahead and machine out the serrations.
-
You probably wouldn't have to machine them out. You could probably just file off the sharp edges.
-
well,,, i tried that when it is on the machine. that roller is tougher than most grizzly parts.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules