Originally Posted by
lowell holmes
I will have a set of planer knives sharpened and Back on the planer in 20-30 minutes. It suits my needs. I often make rocking chairs and tables, so micro flat is not necessary. All of my grandchildren are rocked in chairs I made.
My chairs are 40% machine made and the rest chisles, shaves, and knives.
I'm glad Tony spoke up and let me know I'm not the only one using granite.
It also is a good reference surface for visual check flatness of a surface. It's large enough to accommodate checking large surfaces for flatness.
Be careful following anything I say Lowell: if my chairs rock, it's not because I made them that way!
If the thunder don't get you, the lightning will.