After finally getting the Wolverine Sharpening jig through customs and getting it set up, I set out to get the tools I purchased off eBay sharpened this morning. The tools I bought off eBay were a set of used chisels.
Low and behold, every spindle gouge was too short to use the Vari-Gring jig. and every one of them had to be reshaped.
So a word to the wise, when your buying used tools off of eBay or Amazon, or somplace else, you might want to ask the seller a question about how long the tool steel is. If the tool steel isn't at least 5 1/2" inches long, don't buy the. At 5 1/2", you only have 7/16ths of an inch to grind, which isn't much if you have to reshape them.
Next time, if there isn't at least 6" of tool steel, regardless of who made them, I ain't biting.
Learn from my mistake fellow New-Turners.