Results 1 to 14 of 14

Thread: Hardest finish needed for table legs to prevent damage by nibbling pet Rabbit

  1. 06-06-2016, 6:18 PM #1
    Roberta Glaser
    Roberta Glaser is offline [OP] Member
    Join Date
    Jun 2016
    Posts
    3

    Hardest finish needed for table legs to prevent damage by nibbling pet Rabbit

    We just finished restoring an old table top using Waterlox and a lot of knowledge I gained reading this forum. Thanks!

    I need some help in selecting a very hard finish for the legs. We have a pet rabbit that occasionally escapes and nibbles on furniture legs. The legs of this particular table are nothing special and seem to be a softer wood. Should I look into a 2 part epoxy finish? Behlens Rock Hard?

    Looking forward to seeing what you suggest

    Thanks!
    Reply With Quote Reply With Quote
  3. 06-06-2016, 6:43 PM #2
    Mel Fulks
    Mel Fulks is offline Contributor
    Join Date
    Jul 2012
    Posts
    9,646
    There is a garden product to deter critters from eating plants called "Tree Guard" ; it's harmless but extremely bitter and has a scent tag that you won't be able to smell. I think that is a better approach than picking a finish based on a rabbits idea of bad taste in finishing.
    Reply With Quote Reply With Quote
  4. 06-06-2016, 7:13 PM #3
    Leo Graywacz's Avatar
    Leo Graywacz
    Leo Graywacz is offline Member
    Join Date
    May 2007
    Location
    Connecticut
    Posts
    1,877
    Never gonna happen. There isn't a finish that the rabbit couldn't chew through.

    Maybe dip them in lead.
    Reply With Quote Reply With Quote
  5. 06-06-2016, 7:17 PM #4
    Jim Becker's Avatar
    Jim Becker
    Jim Becker is offline Moderator
    Join Date
    Mar 2003
    Location
    SE PA - Central Bucks County
    Posts
    65,850
    What Leo said...no finish is going to protect from bunny teeth. And it's not just me saying that...Rufus confirmed it...

    --

    The most expensive tool is the one you buy "cheaply" and often...
    Reply With Quote Reply With Quote
  6. 06-07-2016, 12:18 AM #5
    Roberta Glaser
    Roberta Glaser is offline [OP] Member
    Join Date
    Jun 2016
    Posts
    3
    Agreed that once a rabbit decides s/he likes something there is not much that can prevent damage, but the softer finishes get he most abuse. With this project I want to make the first bite a less than pleasurable experience. Perhaps I can try a blended approach: a very hard finish and some bitter spray. So what is the hardest finish I could brush, rub or spray on?
    Last edited by Roberta Glaser; 06-07-2016 at 12:19 AM. Reason: Typo
    Reply With Quote Reply With Quote
  7. 06-07-2016, 8:10 AM #6
    Jim Becker's Avatar
    Jim Becker
    Jim Becker is offline Moderator
    Join Date
    Mar 2003
    Location
    SE PA - Central Bucks County
    Posts
    65,850
    Hard doesn't necessarily mean more durable. Shellac is a very "hard" finish, but it's incredibly easy to break through because of that hard/brittle nature. I'd hazard a guess that some kind of epoxy resin is going to be the most durable, but bunny teeth are still "up to the task". If your pet will respect the spray on deterrent that will help, but we all know that these creatures, when they get their mind on something...similar to a human toddler , will not be stopped by something like that.
    --

    The most expensive tool is the one you buy "cheaply" and often...
    Reply With Quote Reply With Quote
  8. 06-07-2016, 8:23 AM #7
    Al Launier's Avatar
    Al Launier
    Al Launier is offline Member
    Join Date
    Dec 2012
    Location
    Bedford, NH
    Posts
    1,286
    Dental work on the bunny?
    Oops, that won't work: http://www.mypetsdentist.com/rabbit-...ental-care.pml.

    Try the spray on a scrap piece of wood, if that doesn't work try the epoxy resin on the scrap to test for results.
    Thoughts entering one's mind need not exit one's mouth!
    As I age my memory fades .... and that's a load off my mind!
    "We Live In The Land Of The Free, Only Because Of The Brave"
    “The problems we face today are there because the people who work for a living are outnumbered by those who vote for a living."
    "    Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery." Winston Churchill
    Reply With Quote Reply With Quote
  9. 06-07-2016, 8:27 AM #8
    Leo Graywacz's Avatar
    Leo Graywacz
    Leo Graywacz is offline Member
    Join Date
    May 2007
    Location
    Connecticut
    Posts
    1,877
    West system epoxy coated with polyurethane would be tough. Nut bunny teeth tough though.
    Reply With Quote Reply With Quote
  10. 06-07-2016, 8:38 AM #9
    Prashun Patel
    Prashun Patel is offline Moderator
    Join Date
    Apr 2007
    Location
    New Jersey
    Posts
    13,725
    Dip the feet in fox urine.

    Reply With Quote Reply With Quote
  11. 06-07-2016, 8:55 AM #10
    Robert LaPlaca
    Robert LaPlaca is offline Contributor
    Join Date
    Dec 2006
    Location
    Charlotte NC
    Posts
    882
    Quote Originally Posted by Prashun Patel View Post
    Dip the feet in fox urine.

    i know this was suggested tongue and cheek, but check out the product Shake Away.. http://www.shake-away.com/Rabbits.php?page=Rabbits
    Reply With Quote Reply With Quote
  12. 06-07-2016, 11:03 AM #11
    John TenEyck
    John TenEyck is offline Contributor
    Join Date
    Dec 2010
    Location
    WNY
    Posts
    9,715
    Slide some heavy hose material over the legs until the rabbit dies. Course it will just find something else to chew on. Have you considered moving the rabbit to other quarters?

    John
    Reply With Quote Reply With Quote
  13. 06-07-2016, 11:22 AM #12
    Mel Fulks
    Mel Fulks is offline Contributor
    Join Date
    Jul 2012
    Posts
    9,646
    If you use the Tree Guard you can safely use any film finish. Take some food the rabbit likes and put some TG on it, it will try it and then refuse anything that has that scent. You don't just hope it won't chew up the scenery and be a "bad actor".
    Reply With Quote Reply With Quote
  14. 06-07-2016, 2:48 PM #13
    Roberta Glaser
    Roberta Glaser is offline [OP] Member
    Join Date
    Jun 2016
    Posts
    3
    Thanks all for the clever and creative responses. I am impressed how many of you know so much about Rabbits! I have also thought about using rabbit urine as a paint or finish remover - it is so strong lol !!! Since the legs don't appear to be anything high quality anyway I will try the epoxy resin costing and the spray. If that fails I'll get my husband to turn a new pair of round legs. It seems to be the sharp corners that are so irresistible. I'm glad the nibbling rabbit brought me to this forum. Lots of very helpful information and people here.
    Reply With Quote Reply With Quote
  15. 06-07-2016, 3:54 PM #14
    Ryan Mooney
    Ryan Mooney is offline Guest
    Join Date
    Apr 2011
    Location
    north, OR
    Posts
    1,160
    Case them in steel
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules