I'm looking for a honeycomb bed sized 700 x 500.
any help is greatly appreciated
I'm looking for a honeycomb bed sized 700 x 500.
any help is greatly appreciated
HPC LaserScript 1290 80W tube and Lasercut 5.3
HPC Laser in Halifax
You did what !
We ordered some aluminium egg crate core cut to the right size from SLPUK.com Not quite the same as honeycomb, but works nicely. In my understanding, atleast the newer Epilog lasers come with a 1/2 inch egg crate core (or something similar). The 1/2 is a bit too thin, so we place two on top of each other.
Henri Sallinen
Cardboard designer with a Epilog Helix 24 60w + Gunnar Matboard Cutter + Heidelberg Windmill letterpress
When i had my Redsail X700 I went and bought an air-con duct grille of about the right size and that only cost me about $30 AUD. Look for industrial air con duct system suppliers.
Redsail X700 Laser, Creation P-Cut Vinyl Cutter, CNC Mill