end dust , maybe

[charlie spencer]

thanks for that pearl of wisdom

[John Donofrio]

Hi Charlie,

Halfway through this post: http://www.sawmillcreek.org/showthre...71#post2427971
and this post: http://www.sawmillcreek.org/showthread.php?230728-Ductwork-installation-underway&p=2435525#post2435525
explain what I did on the 10-325. It works very well with no modification to the bottom door, only a modification to the restrictor plate inside was made.

Hope this helps.

[John K Jordan]

JKJ....sounds like a very good solution. Could you share a pictures of your setup....
I wonder if equipment companies designed an sold improved dust collection on their machines if it would attract buyers. Would anyone pay a bit more for a properly designed dust control on a machine?

I can take some pictures but it may be a few days. I'm in the middle of preparing a monthly lesson for 50-60 little kids for this Sunday and it usually takes a bunch of the week!

I personally would pay a little extra for good dust collection. I know several people who had to give up wood working and turning due to lung and sensitivity problems. When it's my turn I'd rather go out with a bang than gasping for one more breath.

JKJ

[Al Launier]

I can take some pictures but it may be a few days. I'm in the middle of preparing a monthly lesson for 50-60 little kids for this Sunday and it usually takes a bunch of the week!

I personally would pay a little extra for good dust collection. I know several people who had to give up wood working and turning due to lung and sensitivity problems. When it's my turn I'd rather go out with a bang than gasping for one more breath.

JKJ

Great! Looking forward to them. Thanks.