So I have a grinder now, cbn should be here Thursday or Friday so I started making the wolverine jig. I got the plans from here:
http://www.eberhardt.bz/shop_notes/t...pening_jig.pdf
I am making some changes based on what I think will be easier /better for my style of fabrication. For all I know the changes could be a mistake, I'll soon find out.
The plans and some of the materials, I had all the steel lying around.
ForumRunner_20160911_001255.jpg
Got some of it cut out and prepped.
ForumRunner_20160911_001305.jpg
It's kinda funny, I printed out (to scale) the two styles and drew my redesign on the back of one. Wouldn't you know it, I ended up cutting up the one with my drawing on the back!
Lots of test fitting, drilling, hand filing and finally welded the bolts on.
ForumRunner_20160911_001311.jpg
The nylon washers were not intended, but I had over drilled one of the holes so I had to make mid plan adjustments. I think they will work out perfectly tho.
ForumRunner_20160911_001321.jpg
Now I have to finish the top half, clean everything up and paint.
ForumRunner_20160911_001329.jpg
I hope to finish tomorrow, we'll see if I get garage time.