I have an interesting situation and want to do this to code and as safely as possible.
I have two separate 20 amp breakers (not bonded together) in my main panel (ground and neutral bars in panel are bonded together being a main).
Both circuits leave the main panel in EMT which serves as the ground so two hot wires, and two white wires.
The circuits have to transition through some tight bends that EMT would not be best for so I have the wires running through a short 2 foot section of flexible conduit in a protected area.
I carried a ground wire from the end of the EMT that is connected to the main panel and connected it back into the new metal junction box.
I'm assuming that the ground is correct since it is shared.
I plan to keep the white (Neutral) wires separate all the way to the outlets but was wondering since the ground and neutral are bonded at the panel if it made a difference.
I've always kept neutral wires and hots paired together through a complete circuit.
Any issues with what I'm trying to do?j
Why am I confused?