I started this project a while ago but only spend some of the weekends on it. It is supposed to be a shoe cabinet.
I usually have a sketch of what I want to build on the paper with a few rough dimensions and go from there. For the first time I'm building without any drawing or plan written (everything is in my head).
I wanted to have bowed raised panel doors. I wanted to get a vacuum press to try but never got around to order the parts and build it (maybe for the next time).
The project started with selecting some curly Cherry:

sc1.jpg

Then setup my bandsaw to resaw them to make bent laminations:

sc2.jpgsc3.jpgsc5.jpg

Then make some "ribs" to make a form for the bent lamination. The male/female parts are to have a 3/4" gap (thickness of the panel):

sc6.jpgsc7.jpgsc8.jpgsc9.jpg