Well, let's add some German to the mix.
First, Martin T75 8' slide probably my favorite tablesaw in the shop.
IMG_1149.jpg
Then, Ganner, 46 spindles - one of those "how did I ever manage without? " machines.
IMG_1146.jpg
On to Weinig, 5 spindle entry level machine.
IMG_1145.jpg
Lineal molding made easy.
Next, another Martin, shaping made easy, and accurate. 1 1/2" spindle to mold radius patterns using same knives as the Weinig does for straight. Best return on investment of any machine I have bought.
IMG_1144.jpg
Tilts 45 degrees forward and back.
And another Martin, T75 PreX 12' slide dual tilt machine.
Lots of features, but some pretty poor engineering on basic functions- battery operated DRO's on the crosscut table with no provision for an auto off on the displays after some time with no use.
Eats AA batteries like candy.
Still a great saw, but....
IMG_1147.jpg
And lastly, my least loved machine in the shop, SCMI 37" sander. Feed belt issues from about 6 months.
Oh, and it is missing the "special divoting attachment" - SCM calls it an overthickness stop, but it never failed to get bumped on the last pass, leading to divots across the doors, or in conjunction with the feed belt that couldn't feed consistently. This came to a head one day, and it just "fell off" sideways across the shop.
But it does always run.
IMG_1148.jpg
All guards visible are generally in their most used state.