Results 1 to 6 of 6

Thread: Sign for a small farm

  1. #1

    Sign for a small farm

    This sign is about 40" x 20", sandblasted Western Redcedar. I enjoy doing pictorials that have stuff silhouetted in front of a sunset, but rarely get the opportunity.... most want something more detailed.
    Since painting time is minimal, these can be VERY profitable.
    Attached Images Attached Images

  2. #2
    Join Date
    Jul 2005
    Location
    Sammamish, WA
    Posts
    7,509
    Beautiful work!



    Sammamish, WA

    Epilog Legend 24TT 45W, had a sign business for 17 years, now just doing laser work on the side.

    "One only needs two tools in life: WD-40 to make things go, and duct tape to make them stop." G. Weilacher

    "The handyman's secret weapon - Duct Tape" R. Green

  3. #3
    Join Date
    Oct 2010
    Location
    Mountain City, TN
    Posts
    350
    Did you make your own sandblasting mask? If not, where did you get it?

  4. #4
    Bill, I use Hartco 425 sandmask. Most sign-supply companies will have it. It comes in a 10 yard roll. If you can't find a supplier, call Hartco & they'll tell you who has it near you.
    Sometimes I cut it on the plotter, but mostly I apply it to the glued-up blank & cut it on the CNC,. I use a 30* .125" V-bit to cut it. Profile cut "on the line" set to .030" depth.

  5. #5
    Lovely job, TR !
    Best wishes,
    Ian




    ULS M-300, 45watt. 2002 model with rotary.
    Goldenlaser 130 watt 1300x700. 2011 model
    Esab cnc router, 1989 model, 4 x 2 metre bed, retrofitted to Tekcel, and modded a 2nd time.
    HP L25500 - 60". Roland PNC-1410.
    Screenprinting carousel & 7x4 ft 1-arm bandit vac table.
    Corel Draw X3 & X5, Illy, Indesign & Photoshop CS2 & CS5, Enroute 4
    Pencil, paper, paintbrush, airbrush & dagger-liners & assorted other stuff.

  6. #6
    Thanks Stewie.....

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •