Camera issues today. May go shopping for another. Anyway, I did a bit of re-saw work this morning. Had a 4x4 to saw down into parts. Was looking to get a few at 4/4 by 2" wide. Meh. Plane to smooth and square a blank up. Mainly used a stanley #5-1/2. Got the 45 ready to go, and work on both edges something like this...
IMAG0002.jpg
This being a cut-off. I cut a tenon on one end first, then figured out how long a part was needed to fit between the corner posts and still have a 1-1/2" tenon. Used a mitre box to cut to length, and then a backsaw to make the other tenon.
IMAG0001.jpg
One done, only nine more to do. That wood bodied plane was used to clean the rebate a bit. When I get rested back up, and maybe a new camera.....I'll work some more...
BTW: Mitre Box is a Stanley No. 358.....seemed to do an ok job...