Page 1 of 3 123 LastLast
Results 1 to 15 of 43

Thread: Finally!! New house, new shop and new tools!

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Sep 2014
    Location
    Atlanta, GA
    Posts
    421

    Finally!! New house, new shop and new tools!

    I've been waiting for this mention for a long time now. Finally convinced my wife that it was time for us to move. This lead to the construction of our new home, fast forward 6 months and I now have a 1500 sq. ft. basement for a workshop instead of a 2 car garage.

    During the construction period, I had to give up my fathers day, birthday AND Christmas gift. But.... The wife did promise she'd make it up by letting me buy tools once we close on the house and moved in. She made good on her promise and I ended up with a brand new 15" Powermatic planer with the spiral cutter head along with a Fuji Q5 HVLP spray gun. Oh, I also somehow brought home a 2017 BMW X5 , still not sure how that happened. I swear it just followed me home.

    Anyhow, I thought I'd share some pictures of my new shop. It's still a work in progress since we've only moved in 3 weeks ago. I've only had 2 or 3 days to work on the shop, the rest of the time the wife was cracking her whip pressing me to unpack the house so we didn't live in boxes.

    The builders put in a lot of walls in the basement, most of which aren't even load bearing walls so I do plan to take them down later on. For now they'll have to stay since my wife already has a list of things for me to build. Getting the shop up and running is priority now. I just pulled a permit for all the electrical work yesterday and plan to start running all the wires this weekend. The idea is to have (30) 20 amp outlets throughout the shop plus (3) 20 amp 240v and (1) 30 amp 240v outlets for the bigger toys. I have a friend coming to help this weekend so I'm hoping all the electrical work will be done and inspected by next week.

    Duct work is nearly complete, just missing a few fittings which comes in today so I should be done with it by this weekend.

    I'm open to advise on any improvement I can make so if you have them, I'm all ears.

    Thanks

    Hoang

  2. #2
    Join Date
    Jan 2004
    Location
    Lewiston, Idaho
    Posts
    28,504
    Congratulations on a new shop Hoang!
    Ken

    So much to learn, so little time.....

  3. #3
    Congratulations! And with 1500 sq ft, if shouldn't take more than another 3-4 days to get cramped.

  4. #4
    Join Date
    Nov 2007
    Location
    Goleta / Santa Barbara
    Posts
    962
    Hoang, you're doing something right!

  5. #5
    Join Date
    Mar 2007
    Location
    South Carolina
    Posts
    48
    Huoang,
    The shop looks awesome!
    Quick question - what is the duct material for your DC? I see it's steel but is it Nordfab-type quick connect? I probably should be able to identify from the pics but I'm just now dipping my toes into the DC/ducting planning on my shop and still a newbee on this front.

  6. #6
    Join Date
    Sep 2014
    Location
    Atlanta, GA
    Posts
    421
    Thanks all for the comments.

    Quote Originally Posted by Malcolm McLeod View Post
    Congratulations! And with 1500 sq ft, if shouldn't take more than another 3-4 days to get cramped.
    As you can see, I'm already a little cramped. I'm hoping to get things more organized within the next few days by putting things where they belong. I'm still trying to find a home for everything as I unbox things.

    Quote Originally Posted by Matt Putnam View Post
    Huoang,
    The shop looks awesome!
    Quick question - what is the duct material for your DC? I see it's steel but is it Nordfab-type quick connect? I probably should be able to identify from the pics but I'm just now dipping my toes into the DC/ducting planning on my shop and still a newbee on this front.
    Matt, the pipes are spiral pipes, not Nordfab. I had thought about Nordfab for the longest time and even priced it out. It came to about 3 or 4 times higher cost than what I have now and I felt it wasn't worth it. For that price, I could use the savings on more tools to fill the shop. I don't mind hacking up a few pipes if I need to change up the duct work if that means I can save myself a grand or so. I'm also fortunate enough to have a metal supplier about 30 miles from me that carry spiral pipes and all the fittings. Their prices are a good bit lower than most online vendors I've found and I don't have to pay hundreds in shipping the pipes. In all, I have maybe $400 invested in my duct work, all spiral pipes and fittings.

  7. #7
    Join Date
    Mar 2007
    Location
    South Carolina
    Posts
    48
    Quote Originally Posted by Hoang N Nguyen View Post
    Thanks all for the comments.

    Matt, the pipes are spiral pipes, not Nordfab. I had thought about Nordfab for the longest time and even priced it out. It came to about 3 or 4 times higher cost than what I have now and I felt it wasn't worth it. For that price, I could use the savings on more tools to fill the shop. I don't mind hacking up a few pipes if I need to change up the duct work if that means I can save myself a grand or so. I'm also fortunate enough to have a metal supplier about 30 miles from me that carry spiral pipes and all the fittings. Their prices are a good bit lower than most online vendors I've found and I don't have to pay hundreds in shipping the pipes. In all, I have maybe $400 invested in my duct work, all spiral pipes and fittings.
    Got it. I will look into a similar supplier in my area. What is the material name of the spiral pipes - or it just "spiral pipes"? Is there a specific gauge? I've seen the term "crush" - no idea what that is.
    Lastly - could you share your supplier's info (maybe by PM here if needed). I'm in Greenville, SC and get to ATL often enough to make a run if I can't source it locally.

  8. #8
    Join Date
    Nov 2007
    Location
    NW Indiana
    Posts
    3,078
    Wow..very nice...I am jealous

  9. #9
    Join Date
    Apr 2013
    Location
    Okotoks AB
    Posts
    3,495
    Blog Entries
    1
    Just a heads up; spiral duct is available in a couple of varieties, one that is smooth & another that is ribbed at the seems. The ribbed stuff is substantially stronger, but it also provides much more static pressure loss than the smooth stuff. But I have 26 Ga smooth & it's plenty strong. You don't want the ribbed spiral duct.

    Quote Originally Posted by Matt Putnam View Post
    Got it. I will look into a similar supplier in my area. What is the material name of the spiral pipes - or it just "spiral pipes"? Is there a specific gauge? I've seen the term "crush" - no idea what that is.
    Lastly - could you share your supplier's info (maybe by PM here if needed). I'm in Greenville, SC and get to ATL often enough to make a run if I can't source it locally.

  10. #10
    Join Date
    Mar 2010
    Location
    Elizabeth City, NC
    Posts
    190
    Congratulations Hoang on the new house and shop. Just went through the same thing myself.
    I am not saying go kill all the stupid people......
    I'm just saying let's remove all the warning labels and let the problem sort itself out.

  11. #11
    Nice shop, Hoang! Congratulations. I'm trying to get my own figured out and we moved in 13 months ago; you've definitely got me beat!


    d
    Not all chemicals are bad. Without hydrogen or oxygen, for example, there would be no way to make water, a vital ingredient in beer.

  12. #12
    Join Date
    Oct 2006
    Location
    Bloomington, IL
    Posts
    6,009
    Congrats!!!!!!

  13. #13
    Join Date
    Apr 2013
    Location
    Okotoks AB
    Posts
    3,495
    Blog Entries
    1
    That's a serious amount you've accomplished in just a few days! I too used spiral steel duct & long sweep elbows for my DC. It was a fraction of the cost of Nordfab.

  14. #14
    Join Date
    Dec 2003
    Location
    SF Bay Area, CA
    Posts
    15,332
    Fantastic! I love to hear such shop stories! Gives a man hope!
    Wood: a fickle medium....

    Did you know SMC is user supported? Please help.

  15. #15
    Join Date
    Mar 2003
    Location
    SE PA - Central Bucks County
    Posts
    65,675
    Congrats!!

    And wow...you got a LOT of shop assembly work done in only a few days...wow
    --

    The most expensive tool is the one you buy "cheaply" and often...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •