Looking to buy a new spray gun/outfit. Been reading and the more I read the less I think I know. First I do all my finishing in my shop so being able to transport the unit is not a problem. My shop compressor is 12.5 CFM @ 90 lbs. Most finishes I use are lacquer or varnish base. I would like to be able to use something like SW Pro-Choice, Target EM6500WP . If I have it somewhat correct (removing the operator's skill level from the equation) a air compressor and LVLP gun will give the best finish. Followed by HVLP, then airless systems and Turbo systems. Please let me know if I am right as well as what guns, systems, etc. you might suggest.