I have been tempted to look into Festool dominos stuff. Thought it might make things a little faster for quick builds, but after some reflection decided to hold off.
My reasoning is that since I do everything by hand, but for some resawing with a bandsaw, dominos do not offer that much of a speed increase.
It requires perfect butt joint cuts which can take time if done by hand since one usually has to plane to the line to make it perfect enough.
When I do tenons I do not need these perfect cuts since I reference from the edge and mark my tenons from there.
Any thoughts? I know Derek has been using dominos for his kitchen door build so it must be faster, but how much of a gain is it?
Thanks.