Supplied some textutre panels to a local small theater installation. 1 1/8" MDF to look like fabric curtains. Rough pictures during install.
https://goo.gl/photos/2DTau8MFzKFp4zKUA
[OP]
Contributor
Supplied some textutre panels to a local small theater installation. 1 1/8" MDF to look like fabric curtains. Rough pictures during install.
https://goo.gl/photos/2DTau8MFzKFp4zKUA
Last edited by Mark Bolton; 01-29-2017 at 2:19 PM.
Contributor
Google says the link is broken but I tried to look...
David
CurlyWoodShop on Etsy, David Falkner on YouTube, difalkner on Instagram
[OP]
Contributor
Dang, My mistake, Thanks so much for the heads up.
Here it is again (edited in the OP as well)
https://goo.gl/photos/2DTau8MFzKFp4zKUA
Contributor
Wow! That's an impressive job, Mark. How long did it take to cut those, how many panels, what paint, etc.?
David
CurlyWoodShop on Etsy, David Falkner on YouTube, difalkner on Instagram
[OP]
Contributor
We were running a full 49x97 in about 47 minutes I think. Plus a couple minutes for a front and backside rebate. Less of course as the panels got shorter running up the risers and the sloped wall. 14 Panels total. We were initially to ship them primed but they add a first coat (praying they follow through with the second). Scuff sanded, two coats of Clawlock tinted charcoal and heavily reduced (more than allowed). The final is just a coat of SW Promar200 (latex) they supplied. There are still some inside and outside corner trims to go on that we havent machined yet but they wanted to get the panels up for a soft opening.
Posting Permissions
Reply With Quote